WLED on Shelly 1 - Hardware - WLED
4.5 (477) · € 14.00 · En stock
Hi, has anyone tried to flash the Shelly 1 with WLED and use it as a controller? I would like to use it as a controller for a 12V Stripe, because I can feed it directly with 12V. Here is the information I found about the PIN-Out: I had planned to connect the data line via the SW terminal (GPIO 5) with a resistor to the Shelly. I mean somewhere times have read that this has already been implemented, I find the contribution unfortunately no longer. Greetings Freund der Nacht
Building desktop LED lights with WLED
LED strip controller with wall switch. Working fallback without HA - Hardware - Home Assistant Community
Shelly RGBW2 - Shelly USA
Shelly One WIFI Switch - Scargill's Tech Blog
Other Hardware - WLED MoonModules Project
New WLED controller with 10 pixels strip output ports - Hardware - WLED
My custom WLED controller i recently put together : r/esp32
QuinLED-Dig-Uno v3 is an ESP32 based, addressable LED controller., Because of the ESP32 and WLED 0.12.0 you can now have two independent LED
Dig-Uno : LED Booster Board
allgeek techblog – IoT, Hausautomatisierung, AVR/ESP
WLED - Mit überschaubarem Aufwand zum perfekten LED-Controller
Smart Passive House
Getting Started - WLED Project
